Xtrig ROCS Adjustable Supermoto Triple Clamp Kit

Developed with the world's best teams, the Xtrig ROCS triple clamps are packed with features to improve your bike:

• The ROCS (Revolutionary Opposed Clamping System) opposing fork clamps provide a perfectly even hold on the fork leg, better clamping than traditional single direction clamp, and also improve the natural flexing of the forks while still allowing better function of the fork internals.
• The 14/16mm adjustable offset is made possible by an eccentric stem that positions the stem offset from the stem bearings. The two locking bolts in the bottom of the stem hold it in place. A quick removal of those bolts allows you to rotate the stem to the opposite position, before re-installing them.
• PHDS (Progressive Handlebar Damping System) bar mounts are included with every set of ROCS triple clamps. The elastomers used to hold the handlebar help to absorb vibrations to help reduce fatigue, improving your control. Available to fit 7/8" (22mm) or 1-1/8" (28mm) bar sizes.
• 10mm bar risers are also included for extra customization of your bike's ergonomics.
• The triple clamps are CNC machined and anodized in Xtrig's signature bronze color.
  
  

THIS TRIPLE CLAMP KIT INCLUDES:

• Xtrig ROCS Triple Clamps
• Xtrig 22mm KTM Supermoto Front Axle
• Xtrig 22mm KTM Supermoto Front Left Wheel Spacer
• Xtrig 5mm KTM Supermoto Front Rotor Spacer

NOTE:  THIS TRIPLE CLAMP KIT CHANGES YOUR FORK WIDTH!
These clamps are 200mm wide and require all the components in this kit (longer axle, left wheel spacer, and rotor spacer) for a complete bolt-on assembly. Please note, this setup is different than the 205mm width of FS450/450SMR. Scroll to the bottom of this page for FS/SMR details.

GASGAS

EC 250, 2021-and up
EC 250F, 2021-and up
EC 300, 2021-and up
EC 350F, 2021-and up
---
EX 250F, 2021-and up
EX 300, 2021-and up
EX 350F, 2021-and up
EX 450F, 2021-and up
---
MC 125, 2021-and up
MC 250F, 2021-and up
MC 450F, 2021-and up

HUSQVARNA

FC 250, 2015-2022
FC 350, 2015-2022
FC 450, 2015-2022
FC 450 Rockstar Edition, 2015-2021
---
FE 250, 2016-2023
FE 350, 2016-2023
FE 450, 2016-2023
FE 501, 2016-2023
---
FX 250, 2017
FX 350, 2017-2022
FX 450, 2017-2022
---
TC 125, 2015-2022
TC 250, 2015-2022
---
TE 150, 2017-2023
TE 150i, 2020-2023
TE 250, 2016-2023
TE 250i, 2018-2023
TE 300, 2016-2023
TE 300i, 2018-2023
---
TX 125, 2017-2020
TX 300, 2017-2022
TX 300i, 2018-2022

KTM

125 EXC, 2016-2017
125 EXC Six Days, 2016-2017
125 SX, 2015-2022
---
150 SX, 2015-2022
150 XC, 2015-2022
---
200 EXC, 2016-2023
200 XC-W, 2016-2023
---
250 EXC, 2016-2023
250 EXC Six Days, 2016-2023
250 EXC-F, 2016-2023
250 EXC-F Six Days, 2016-2023
250 SX, 2015-2022
250 SX-F, 2015-2022
250 SX-F Factory Edition, 2015-2021
250 XC, 2015-2022
250 XC-F, 2015-2022
250 XCF-W Six Days, 2016-2023
250 XC-W, 2016-2023
250 XC-W Six Days, 2016-2023
---
300 EXC, 2016-2023
300 EXC Six Days, 2016-2023
300 XC, 2015-2022
300 XC-W, 2016-2023
300 XC-W Six Days, 2016-2023
---
350 EXC-F, 2016-2023
350 EXC-F Six Days, 2016-2023
350 SX-F, 2016-2022
350 XC-F, 2016-2022
350 XCF-W, 2016-2023
350 XCF-W Six Days, 2016-2023
---
450 EXC, 2016-2023
450 EXC Six Days, 2016-2023
450 SX-F, 2015-2022
450 SX-F Factory Edition, 2014-2021
450 XC-F, 2015-2022
450 XCF-W, 2016-2023
450 XCF-W Six Days, 2016-2023
---
500 EXC, 2016-2023
500 EXC Six Days, 2016-2023
500 XCF-W, 2016-2023
500 XCF-W Six Days, 2016-2023

FITMENT NOTES:

** FS450 and 450SMR come with a wider 205mm triple clamp. To use the 200mm Xtrig triples, you will need to shorten your OE axle as well as your left side wheel spacer, but use the Xtrig rotor spacer. Also, changing to the narrower 200mm Xtrig clamps may result spoke/caliper clearance issues due to these triple clamps being narrower than stock! May require machining of caliper backside, or replacing original caliper with a low profile aftermarket caliper like Beringer or Brembo Racing.