Moto-Master Halo T-Floater Supermoto Racing Kit - 320mm

Moto-Master HALO T-Floater Supermoto Racing Kit #313080

This is the Ultimate Racing Disc for the professional Supermoto rider. Born on the race track, born as a winner: Its Full-Floating HALO design combines superior, controllable stopping power with optimal heat dispersion. HALO-T-Floater concept is 2019 IDM German Superbike Champion & British Superstock 1000 Champion.

This rotor is also available in the Supermoto Racing Kit with Radial Master Cylinder, Stainless Braided Brake Line, 4-Piston Caliper Kit, and a set of SinterPro RacingGP Brake Pads.

This 320mm kit is designed to fit all 17" spoke supermoto wheels. If you are racing with a 16" or 16.5" front wheel, the 300mm kit (#313069) is recommended because it allows for easier wheel changes.

Kit includes:

• 320mm Halo T-Floater Supermoto Racing Rotor
• 4-piston Billet Racing Caliper
• SinterPro Brake Pads, Racing-GP compound
• Billet Caliper Adapter
• 12mm Radial Master Cylinder
• Stainless Braided Brake Line
  
  NOTE: Brake line length length is designed for use with a front number plate. If you're using a headlight, please use kit #313081 with the longer brake line.

YAMAHA

YZ 125, 2008-and up
YZ 250, 2008-and up
YZ 250F, 2007-and up
YZ 250FX, 2015-2017
YZ 250X, 2016-and up
YZ 450F, 2008-and up
YZ 450FX, 2016-2017

(Also fits these bikes if using a front number plate instead of a headlight.)
WR 250, 2016-and up
WR 250F, 2020-and up  *See Fitment Note #2
WR 450F, 2019-and up  *See Fitment Note #2
WR 450F Enduro GP, 2019-and up  *See Fitment Note #2

FITMENT NOTES:

1. The rotor in this kit does NOT fit WR250R hubs due to 1mm difference in bolt pattern.

2. Restrictions: Speed sensor rings from the newer WR-F models do not fit with this rotor. You will need to use an aftermarket speedo system if you want to use this rotor on your WR-F and still retain a speedometer.