Moto-Master Flame Supermoto Racing Kit - 320mm

For the ultimate in stopping power, look no further. The Supermoto Racing kit combines all of the Moto-Master Supermoto Racing products in one go. This kit was specifically developed for serious Supermoto racing.

An appropriately matched master cylinder and caliper means great stopping power with better feel and less hand fatigue, while the 320mm rotor is increased to 5mm thick to avoid deformation or fading up to 1,004 degrees Fahrenheit (540C).

Kit includes:

• 320mm Flame Supermoto Racing Rotor
• 4-piston Billet Racing Caliper
• SinterPro Brake Pads, Racing-GP compound
• Billet Caliper Adapter
• 12mm Radial Master Cylinder
• Stainless Braided Brake Line
  
  NOTE: Brake line length is designed for use with a headlight. If you're using a front number plate for racing, please use Kit #313040 with a slightly shorter brake line.

YAMAHA

WR 250, 2016-and up
WR 250F, 2020-and up  *See Fitment Note #2
WR 450F, 2019-and up  *See Fitment Note #2
WR 450F Enduro GP, 2019-and up  *See Fitment Note #2

(Also fits these bikes if using a headlight instead of a front number plate.)
YZ 125, 2008-and up
YZ 250, 2008-and up
YZ 250F, 2007-and up
YZ 250FX, 2015-2017
YZ 250X, 2016-and up
YZ 450F, 2008-and up
YZ 450FX, 2016-2017

FITMENT NOTES:

1. The rotor in this kit does NOT fit WR250R hubs due to 1mm difference in bolt pattern.

2. Restrictions: Speed sensor ring from the newer WR-F models does not fit with this rotor. You will need to use an aftermarket speedo computer if you wish to have a speedometer.