Warp 9 Tubeless Forged Supermoto Rear Wheel

Warp 9 Tubeless Forged Wheels are light-weight, TUBELESS, and trouble-free. No more adjusting spokes and no more instant-flats from bursting inner tubes! With tubeless wheels a punctured tire usually goes flat slower, allowing you to come to a stop safer! Gain performance from the weight loss, thanks to light-weight forged aluminum wheels and an absence of heavy inner tubes!

• Forged wheel for superior strength.
• Truly modular hub system, so you can swap hubs to fit any bike that Warp 9 offers hubs for!
• 90 degree valve stems for easy access.
• Cush drive to lessen the wear and tear on your bike.
• Their balance of strength and weight savings make for a great wheel that will take a beating and keep on rolling. In the unlikely event you do run into problems, Warp 9 is the only wheel company to stand behind their warranty with a warranty! You just pay a small deductible type fee and they'll repair it.

THIS REAR WHEEL INCLUDES:

Warp 9 Tubeless Forged Wheel Assembly: 

• Choose Rim Style: Stiletto, Switch, or Rogue design.
• 17x4.25" rear wheel: The 4.25" width is a standard go-to for street supermoto conversions. It offers great performance but is also just narrow enough to make for an easier wheel change. (The 17x5.0" rear rim option is not available for Yamaha models due to the limited hub offset of Warp 9's available hub carriers.)
• Choose Your Colors: Choose from the many different colors and finishes offered for the hubs, spokes, nipples, and rims!
• Rear Hub comes standard with cush drive rear hub for more longevity. This feature is a rubber-dampened sprocket carrier that similar to a street bike, which helps to lessen the wear on your transmission components and soften the hit of riding on asphalt.
• Original Bolt Patterns are used on the hubs for rotors & sprocket, so there's no special fitments required.
• Warranties are unheard of for motorcycle wheels, but Warp 9 comes pretty close! In the unlikely event you do run into problems, Warp 9 will repair your wheel for a very small, but reasonable fee. It's like a cheap insurance deductible, except there's no monthly premium to get the coverage and support!

Warp 9 Rear Rotor:

• Stock-size 240mm fixed rear rotor, available in the Apex (cross-drilled) or wave design. (Apex is standard.)
• Original bolt pattern.

Warp 9 Sprocket:

• Choose Size: 40-53 tooth count.
• Original bolt pattern.

Rotor & Sprocket Hardware:

• Standard Steel Alloy (standard option).
• Burnt titanium saves you nearly half the weight of standard steel hardware, and it adds a touch of color with its rainbow coloring from the burning affect.
  

PLEASE NOTE:

These wheels are typically special order: Some orders may take extra time to complete. Please call if you are in a rush and want to check in-stock availability or expedited options.

FITS MODELS WITH A 25MM REAR AXLE

GASGAS

EX 250, 2022-and up
EX 250F, 2021-and up
EX 300, 2021-and up
EX 350F, 2021-and up
EX 450F, 2021-and up
--
MC 250, 2021-and up
MC 250F, 2022-and up
MC 300, 2021-and up
MC 350F, 2022-and up
MC 450F, 2021-and up

HUSSQVARNA

FC 250, 2015-and up
FC 350, 2016-and up
FC 450, 2015-and up
FC 450 Rockstar Edition, 2018-and up
--
FS 450, 2015-and up
--
FX 350, 2017-and up
FX 450, 2017-and up
--
TC 125, 2016-and up
TC 250, 2017-and up
--
TX 300, 2017-2019
TX 300i, 2020-and up

KTM

125 SX, 2013-and up
--
150 SX, 2013-and up
--
150 XC, 2013-2015
--
250 SX, 2013-and up
250 SX-F, 2013-and up
250 SX-F Factory Edition, 2015-and up
250 XC, 2013-2019
250 XC TPI, 2020-and up
250 XC-F, 2017-and up
--
300 XC 2013-2020
300 XC TPI 2020-and up
--
350 SX-F, 2013-and up
350 XC-F, 2013-and up
350 XC-F Kailub Russell, 2013-and up
--
450 SMR, 2013-and up
450 SX-F, 2013-and up
450 SX-F Factory Edition, 2012-and up
450 XC-F, 2013-2017