Warp 9 Rogue Wheel

Warp 9 Tubeless Forged Front Wheel

Availability: Built To Order: 4-8wks

Warp 9


$844.00

Product Options
Rim Style
Rim Color
Hub and Valve Stem Color
Front Hub Options
Speedo-drive hub will interface with the stock speedo unit on the side of the hub.
Standard hubs come with a spacer to replace the stock speedo drive. Use this option if you have an aftermarket speedometer like a Trail Tech.
Rotor Options
Hardware Options

Warp 9 Tubeless Forged Wheels are light-weight, TUBELESS, and trouble-free. No more adjusting spokes and no more instant-flats from bursting inner tubes! With tubeless wheels a punctured tire usually goes flat slower, allowing you to come to a stop safer! Gain performance from the weight loss, thanks to light-weight forged aluminum wheels and an absence of heavy inner tubes!

  • Forged wheel for superior strength.
  • Truly modular hub system, so you can swap hubs to fit any bike that Warp 9 offers hubs for!
  • 90 degree valve stems for easy access.
  • Apex floating rotor is standard option - it dissipates heat better than the single piece wave rotors.
  • Their balance of strength and weight savings make for a great wheel that will take a beating and keep on rolling. In the unlikely event you do run into problems, Warp 9 is the only wheel company to stand behind their warranty with a warranty! You just pay a small deductible type fee and they'll repair it.

THIS FRONT WHEEL INCLUDES:

Warp 9 Tubeless Forged Wheel Assembly: 

  • Choose Rim Style: Stiletto, Switch, or Rogue design.
  • 17x3.50" front wheel: The standard for street going bikes.
  • Choose Your Colors: Choose from the many different colors and finishes offered for the hubs, spokes, nipples, and rims!
  • Speedo Hub Drive connects to stock speedometer drive. (Due to the smaller wheel size, the speedometer will read inaccurately.) Alternatively, you can select a YZ-Style hub carrier, which will come with a speedo-delete wheel spacer. Then you can use an aftermarket magnet style speedo like the Trail Tech Vapor
  • Original Bolt Patterns are used on the hubs for rotors & sprocket, so there's no special fitments required.
  • Warranties are unheard of for motorcycle wheels, but Warp 9 comes pretty close! In the unlikely event you do run into problems, Warp 9 will repair your wheel for a very small, but reasonable fee. It's like a cheap insurance deductible, except there's no monthly premium to get the coverage and support!

Warp 9 Front Rotor Options:

  • Stock-Size Wave Rotors: 
    Stock-size 250mm front rotor. This offers the fastest change between dirt and supermoto because you can leave the front caliper bolted to the fork, however, it's not recommended for stunting, track riding, or spirited/aggressive riding.
  • Supermoto Wave Rotors (Standard option): 
    Fixed 320x4mm front rotor, along with adapter for stock front caliper.
  • Supermoto Apex Rotors: 
    Floating 320x4mm front rotor, along with adapter for stock front caliper. This will dissipate heat faster and can take a bit more abuse than a fixed rotor.

Rotor Hardware:

  • Standard Steel Alloy (standard option).
  • Burnt titanium saves you nearly half the weight of standard steel hardware, and it adds a touch of color with its rainbow coloring from the burning affect.

PLEASE NOTE:

These wheels are typically special order: Some orders may take extra time to complete. Please call if you are in a rush and want to check in-stock availability or expedited options.

Bike Type & Riding Style Supermoto, Stunt
Product Type Wheels
Position on Machine Front

Write a review

Warp 9 Tubeless Forged Front Wheel

Warp 9 Tubeless Forged Front Wheel

* Required fields

YAMAHA

WR 125, 1998-2007
WR 250, 1998-2007
WR 250F, 2001-2016
WR 450F, 2003-2015