Warp 9 Elite Supermoto Racer Conversion

Warp 9 Elite Supermoto Racer Conversion

Try the WHEEL BUILDER to see your color combo!

More details

Availability: 8wk build time

Warp 9


$1,449.99

Product Options
Front Rim Size
Rear Rim Size
Tire Model
Rim Color
Nipple Color & Type
Spoke Color & Type
Hub Color
Tubes or Tubeless
Rear Hub Options
Rotor Options
Sprocket Size
Hardware Options
Add a Chain
Add a Chain Block
Add a Supermoto Front Fender
Add Handguards
Add an Hour Meter
Add Tire Warmers

Build your supermoto faster and easier with a ready-to-go conversion! Wheels and tires come MOUNTED & BALANCED, so you're one step closer to riding as soon as you open the box.

There are a lot of options and add-ons in our conversion kits, so be sure to read the details below very thoroughly! If you have questions, don't hesitate to reach out by phone or email!

THIS RACER CONVERSION INCLUDES:

Warp 9 Wheels: Great quality wheels that don't break the budget. Their balance of strength and weight savings make for a great wheel that will take a beating and keep on rolling. 

  • 17x3.5" or 16.5x3.5" front wheel: The 16.5 is highly recommended for increased traction and stability in cornering! This is a race size only, as there are no street tires in 16.5 size.
  • 17x5.0" rear wheel: This is the optimal size for building a supermoto race bike or track bike, and it also fits with the available supermoto rear tires sizes of 160-165. The narrower 17x4.25" rim size is not offered in this kit because the supermoto race tires aren't offered in a size to fit that.
  • Choose Your Colors: Choose from the many different colors and finishes offered for the hubs, spokes, nipples, and rims!
  • Direct Drive or Cush Drive Rear Hub: Choose from Direct Drive or Cush Drive. Direct Drive is recommended for race bikes because it weighs the least and transfers power directly. Cush drive does help lessen the wear on your transmission components, but it also weighs more and there is some loss of power due to the rubber dampers that soften the hit of riding on asphalt.
  • Stainless Steel or Titanium spokes: Titanium spokes save 1/2lb per wheel! *To select the titanium spokes, you must first choose an aluminum nipple color, as those are standard with the titanium spoke upgrade. (Titanium spokes are not yet available for 16.5" wheel size.)
  • Hubs use original bolt patterns for rotors & sprocket.
  • Warranties are unheard of for motorcycle wheels, but Warp 9 comes pretty close! In the unlikely event you do run into problems, Warp 9 will repair your wheel for a very small, but reasonable fee. It's like a cheap insurance deductible, except there's no monthly premium to get the coverage and support!

Rotor Options & Caliper Upgrades: Use Warp 9 rotor options or add a complete supermoto front brake kit to really give you the stopping power a race bike needs!

  • Warp 9 Wave Rotors: 
    Fixed 320x4mm front rotor, adapter for stock front caliper, and stock-size 245mm rear rotor.
  • Warp 9 Apex Rotors: 
    Floating 320x4mm front rotor, adapter for stock front caliper, and stock-size 245mm rear rotor.
  • Moto-Master Flame Racing Kit: 
    Floating 320x5mm front rotor, 4-piston front caliper, braided stainless front line, and radial front master cylinder. Includes stock-size 245mm Moto-Master rear rotor.
    *300mm rotor used with 16.5" front rim size.
  • Moto-Master HALO Racing Kit: 
    Floating 320x5.5mm front rotor, 4-piston front caliper, braided stainless front line, and radial front master cylinder. Includes stock-size 245mm Warp 9 Apex rear rotor.
    *300mm rotor used with 16.5" front rim size.
  • Beringer Stage 2 Racing Kit: 
    Floating 320x6mm front rotor, 6-piston front caliper, braided stainless front line, and radial front master cylinder. Includes stock-size 245mm Innteck rear rotor.
    *310mm rotor used with 16.5" front rim size.

    * Moto-Master & Beringer Rotor Sizes
    If you select a 16.5" front rim size, the smaller rotors are used because they allow for much easier removal of the caliper. Otherwise, the 17" front rim selection is paired with a 320mm rotor to allow proper spoke clearance for the back of the caliper.

Warp 9 Sprocket:

  • Choose Size: 40-53 tooth count.

Rotor & Sprocket Hardware:

  • Standard Steel Alloy.
  • Burnt titanium saves you nearly half the weight of standard steel hardware, and it adds a touch of color with its rainbow coloring from the burning affect.

Tire Options: (NOT FOR STREET USE)

  • Metzeler Racetec SM - Available with either 16.5" or 17" front sizes. 125/75 front profile and 165/55 rear profile.
  • Michelin Power Supermoto - Available only with 16.5" front size. 120/80 front profile and 160/60 rear profile.
  • Tires are mounted & balanced.

Optional TUBELESS Conversion:

  • Utilizes 3mm thick sealing system and a unique valve stem.
  • Valve stem comes with anodized stem on the outside to match your colors and stainless steel hardware on the inside to prevent corrosion.
  • Allows user to plug punctures in the tire for a quicker repair, as opposed to changing tubes.
  • If a puncture is encountered, a tubeless setup will typically lose air slower than a tube which usually bursts and loses all air right away.

Optional Accessories:

  • Add a Chain to fit with your new gearing combination. Choose from the high quality options shown: Moto-Master, EK, Vortex, and more!
  • Add a Chain Block to keep the chain from slapping the rear wheel & tire.
  • Add Tire Warmers to keep your tires hot between sessions at the track, allowing you to go out and shred with already hot tires!
  • Add Handguards to wrap-around handguards to protect your levers. Choose from Acerbis and Cycra options.
  • Add a Supermoto Fender. Shorter than stock, these will match the smaller front wheel and complete the look of your bike.
  • Add an Hour Meter to keep track of engine run time.

PLEASE NOTE:

  • CLOSED COURSE ONLY: This kit is only for use on a closed-course. These tires not for street use!

  • These conversion kits are typically special order: The wheels are built to order and some brake components may be special order as well. Some orders may take extra time to complete. Please call if you are in a rush and want to check in-stock availability or expedited options.
Bike Type & Riding Style Supermoto
Product Type Conversion Kits

Write a review

Warp 9 Elite Supermoto Racer Conversion

Warp 9 Elite Supermoto Racer Conversion

Try the WHEEL BUILDER to see your color combo!

* Required fields

YAMAHA

YZ 250FX, 2015-2016

These wheels are built and ready to go! To order in-stock wheels listed below, please make sure to select all of the colors & specs shown for the wheels you are interested in. If you are ordering a complete conversion kit, customize the remaining options to your liking and then add the conversion kit to your cart.

Please add a note during checkout to confirm that you're after an in-stock wheel set. Allow 2-5 days to process the order (tires mounted, accessories installed, tubeless pressure checks, etc). Thanks! 

---

Street Or Track SPOKE Wheels With DIRECT Drive Rear Hub:

1x Set:  Warp 9 Elite Spoke Wheels, 17x3.50 & 17x4.25
Fluo Yellow rims, Silver nipples, Silver spokes, Blue hubs. (Direct drive)

1x Set:  Warp 9 Elite Spoke Wheels, 17x3.50 & 17x4.25 TUBELESS INSTALLED
Black rims, Silver nipples, Silver spokes, Black hubs. (Direct drive)
*Must select tubeless option, tubeless is already installed and cannot be removed from wheels.

1x Front:  Warp 9 Elite Spoke Wheels, 17x3.50
Black rims, Silver nipples, Black spokes, Blue hubs.
Can get rear wheel to make a set, built to order.

---

Street Or Track SPOKE Wheels With CUSH Drive Rear Hub:

None Prebuilt.

---

Street or Track TUBELESS FORGED Wheels With CUSH Drive Rear Hub:
These are the components we have on the shelf that can be assembled into a wheel set.

Hub Carriers:
- None in stock

Rogue Rims:
- Black - 17x3.50 & 17x4.25
- Black - 17x3.50 & 17x5.00
- Gold - 17x3.50 & 17x4.25
- Orange - 17x3.50 & 17x4.25
Stiletto Rims:
- Black - 17x3.50 & 17x5.00
- Orange - 17x3.50 & 17x5.00
- Red - 17x3.50 & 17x4.25
Switch Rims:
- Black Switch - 17x3.50 & 17x4.25

---

Track-Only Wheels With 16.5" Front Wheel:

None pre-built.

---

---

(To confirm availability, call before ordering.)

  • Fork Guard Clearance:
    Fork guards will need to be slightly trimmed near the edge of the tire, to prevent rubbing.

  • Front Brake Line Routing:
    When bolting the caliper back on with the new 320mm rotor, it's best to route the brake line on the inside of the fork leg to avoid any outside impact. This can prevent the line from being ripped off and ending your ride or race. Carefully route the line by positioning enough slack on the caliper side of the brake line clamp to allow the line to sit directly between the rim and the rotor. Avoid letting the line sag or sit loosely. If necessary, you can secure the line to the inside of the fork guard by drilling small holes through the guard and zip-tying the line in place. See picture for example.

  • Swingarm Clearance:
    The actual width of a tire can vary, regardless of their named size. The Metzeler Racetec SM runs just slightly narrower than the Michelin Power Supermoto, however both will fit.

  • Avoiding Chain Rub On Rear Tire:
    It's highly recommended to run a Chain Block with this racer conversion. It will keep the chain from slapping the tire and rim so you can avoid the unsightly rubbing, as well as chain grease on your tire.