Warp 9 Elite Supermoto Racer Conversion

Build your supermoto faster and easier with a ready-to-go conversion! Wheels and tires come MOUNTED & BALANCED, so you're one step closer to riding as soon as you open the box.

Warp 9 continues to show how to build a supermoto easily and quickly without breaking the budget. Their wheels include front and rear rotors, rear sprocket, and wheel spacers, so all you have to do is add tires! Their balance of strength and weight savings make for a great wheel that will take a beating and keep on rolling. In the unlikely event you do run into problems, Warp 9 is the only wheel company to stand behind their warranty with a warranty! Spoked wheels are covered with a $60 cover-anything warranty deductible. 

Choose from Warp 9's massive range of color combos and get your wheels built to match your style!

This Racer Conversion Includes:

• Warp 9 Wheels:
  • 17x3.5" or 16.5x3.5" front wheel. (16.5 is highly recommended for increased traction and stability in cornering!)
  • 17x5.0" rear wheel. (The race tires are only offered in a 160/165 size range.)
  • You choice of color combination.
     
• Warp 9 Front and Rear Rotors:
  • Choose Front: 320mm Apex floating, 320mm Wave, Original size wave, or No Rotor.
    Caliper adapter bracket included for 320mm rotor.
  • Choose Rear: Original size, matching design to front rotor.
  • Upgrade to Race Brake Kit: Moto-Master 4-Piston Caliper, 320mm racing flame rotor, & matching rear flame rotor.
  • Rotor bolt patterns are original fitment.
    
    
• Warp 9 Sprocket:
  • Choose size: 40, 44, or 47-51T.
  • Original sprocket bolt pattern. 
    
    
• Tire Options:
  • Choose: Metzeler Racetec SM or Michelin Power Supermoto racing tires. (NOT for street use.)
    
    
• Available Options to Add:
  • Chain to fit with your new gearing combination.
  • Chain Block to keep the chain from slapping the rear wheel & tire.
  • Wrap-around handguards to protect your levers.
  • Supermoto fenders that are shorter than stock, to match smaller front wheel.

Setup Recommendations For Your Bike:

• CLOSED COURSE ONLY: This kit is for track use only, these tires not for street use!
  
  
• Fork Guard Clearance:
  Fork guards will need to be slightly trimmed near the edge of the tire, to prevent rubbing.
  
  
• Front Brake Line Routing:
  When bolting the caliper back on with the new 320mm rotor, it's best to route the brake line on the inside of the fork leg to avoid any outside impact. This can prevent the line from being ripped off and ending your ride or race. Carefully route the line by positioning enough slack on the caliper side of the brake line clamp to allow the line to sit directly between the rim and the rotor. Avoid letting the line sag or sit loosely. If necessary, you can secure the line to the inside of the fork guard by drilling small holes through the guard and zip-tying the line in place. See picture for example.
  
  
• Rear Tire Fitment For Rim Size:
  160-165 rear on 17x5.00.
  
  
• Tire Clearance from Chain & Swingarm:
  Fitting a 17x5 rear wheel with the 160-165 race tires is certainly possible on the RM/RMZ, but it's not easy and requires some extra attention during setup. Since the swingarm tapers and gives less tire clearance the more the tire moves forward, you will need to keep the wheel further back in the swingarm. To accomplish this, you may need to play with sprocket size combinations so you can properly tension the chain while keeping the wheel positioned further back in the swingarm.
  
  
• Avoiding Chain Rub On Rear Tire:
  The Chain Block is absolutely critical to avoid chain slap and a greasy tire. Proper installation of the chain block with the wheel positioned further in the back of the swingarm will provide just a couple millimeters of clearance on either side of the tire. This is as tight as it gets and just barely works!
  
  
• Colors & Cleaning:
  White and lighter colors are harder to keep clean, as well as matte finishes. Powder coat finishes are smooth and can be easier to clean. All finishes can be damaged by brake cleaner and other harsh chemicals! Dish soap in a spray bottle is a great option, but no matter the cleaner, always rinse parts right away.

SUZUKI

RM-Z 250, 2018-and up
RMX 450Z, 2018-and up
RM-Z 450, 2018-and up