No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Moto-Master RoadPRO Carbon Racing Front Brake Pads
Moto-Master RoadPRO Brake Pads are developed to give you the most performance and longest life out of your brake system. RoadPRO pads come in 5 different compounds to best match various bike purposes and models. Moto-Master Road Pro pads are developed to perfectly match Moto-Master Brake Discs.
- Fits Original caliper
- Price is for one set of pads, to fit a single caliper.
- For dual front calipers, purchase quantity of 2x.
| Moto-Master RoadPro Pads | Sinter Front | Sinter Rear | Carbon Racing |
|---|---|---|---|
| Long Pad Life | ●●●●● | ●●●●● | ●●●○○ |
| Initial Bite (Brake Power) | ●●●●● | ●●●●○ | ●●●●○ |
| Temperature Resistance | ●●●●○ | ●●●●○ | ●●●●● |
| Cold Performance | ●●●●● | ●●●●● | ●●○○○ |
| Fade Resistance | ●●●●○ | ●●●●○ | ●●●●● |
| Application |
Sport/Street/ Trackday/Race |
Track Only: Road Race Supermoto |
|
RoadPRO Sinter front:
Sintered FRONT street brake pad for new generation high performance sports, touring and custom motorcycles. Offers a combination of fade free brake performance, great brake feel and thermal stability. The RoadPro Sinter Front has been especially developed for sport riding and high loads from heavy motorcycles.
RoadPRO Sinter rear:
Sintered REAR street brake pad for new generation high performance sports, touring and custom motorcycles. It provides the necessary and expected brake performance in combination with the RoadPRO Sinter front pad.
RoadPRO Racing Carbon:
Race proven, Carbon based compound for Superstock, Supersport and Superbike racing at World Championship level. Equipped with NRS technology which provides a constant pressure point all through the brake pad lifecycle.
| Product Type | Brakes |
| Brake Component Type | Brake Pads |
| Moto-Master Product Group | Brake Pads |
Moto-Master Road PRO Carbon Racing brake pads Bedding-in procedure.
--
1. New Discs & Road PRO Carbon Racing brake pads:
1a. Achieve optimal pad/disc surface contact by a series of gentle brake applications.
1b. Repeat short brake applications, building up the heat, until the necessary transfer film is achieved on the disc (colour: uniform, thin black/dark blue layer), typically after 3-6 laps (thermal bedding-in).
1c. Thereafter cool the brakes for 5-10 minutes.
2. Disc already in use with Road PRO Carbon Racing brake pads:
2a. Never clean (grind) disc surface when replacing to new Road PRO Carbon Racing brake pads, otherwise the transfer film will disappear.
2b. Repeat procedure 1a. 2c. Procedures 1b and 1c are not necessary.
3. Disc in use with pads other than Road PRO Carbon Racing brake pads:
3a. Clean disc surface from previous brake pad residue.
3b. Apply procedures 1a, 1b and 1c.
--
ATTENTION! Non-compliance with Carbon bedding-in procedures in many cases may lead to a permanent loss of performance and/or disc vibrations. Replace the pads when the friction material is worn to 2mm (0.08”) or less. For Dual Disc (Front wheels) replace all four pads. Keep pads free from oil and other contaminants. Moto-Master Road PRO Carbon Racing brake pads are for RACE use only. Not for public road use.
SAFETY NOTICE: Consult a certified dealer or professional mechanic if you are not fully qualified in motorcycle maintenance. Moto-Master Europe BV cannot be held responsible for any damage or injury caused by incorrect product mounting, disregarding specifications/bedding-in procedure and these instructions, or product mounting by an unqualified third party.
