Excel Takasago Supermoto Racer Conversion

Build your supermoto faster and easier with a ready-to-go conversion from Toxic Moto Racing! Wheels and tires come MOUNTED & BALANCED, so you're one step closer to riding as soon as you open the box.

Excel has been in the game for a long time and their rims have proven themselves time and time again. These rims are laced with either Talon or Haan hubs for an ultimate combination that will take a beating and keep rolling strong!

THIS RACER CONVERSION INCLUDES:

Tire Options: (NOT FOR STREET USE) Pick your tires first because each tire manufacturer only offers their tires for certain rim sizes. Each of the tire sizes are all similar in overall diameter, however, the tire profiles get slightly taller with each drop in rim size. This provides an increase in traction when leaned over, and gets better with each drop in rim size.

• Metzeler Racetec SM - Available with either 16.5" or 17" front sizes. 125/75 front profile and 165/55 rear profile.
• Michelin Power Supermoto - Available in 16" and 16.5" front sizes. 120/80 front profile and 160/60 rear profile.
  **The 16" option is only available with traditional inner tubes due to the custom rim that makes it difficult to install a tubeless kit. However, it's well worth that small sacrifice for the insane grip at full lean!
• Tires are mounted & balanced.

Excel Wheels:

• Excel Takasago rims laced to Haan Billet hubs.
• 17x3.5", 16.5x3.5", or 16x3.5" front rim size.
• 17x5.0" or 17x5.5" rear rim sizes.
• Your choice color combination, with rims being limited to black, gold, or silver.
• Hubs use original bolt patterns for rotors & sprocket.
• Includes rotor & sprocket hardware.

Optional Accessories:

• Add a Chain Block to prevent chain slap on the wider tires! Recommended for 160 tires. This is a MUST for your KX.
• Add a Brake Upgrade to make your conversion complete and also offer much better performance than the stock rotor and caliper. Includes 
  
  • Moto-Master Flame Racing Rotors: 
    Original-size floating 310x5mm front and original-size fixed 220x4mm rear.
  • Moto-Master HALO Racing Rotors: 
    Oversized floating 320x5.5mm T-floater front rotor and original-size fixed 220x4mm rear.
  • Beringer Aeronal Front Rotor & Innteck Rear:
    Floating 310x6mm cast iron front rotor and original-size 220x4mm Innteck rear rotor.
  • Beringer Stage 2 Racing Kit: 
    Floating 310x6mm front rotor, 4-piston radial front caliper, braided stainless front line, and radial front master cylinder. Includes stock size 220x4mm Innteck rear rotor.
• Upgrade to Titanium rotor & sprocket hardware.
• Add a Rear Sprocket in either steel or aluminum from Moto-Master.
• Add a Front Sprocket from Moto-Master to dial in the drive ratio for your riding. 
• Add a Supermoto Front Fender to compliment the smaller tire. Available in white Husqvarna FS style and black or orange KTM SMR style.
• Add a Chain to fit with your new gearing combination. Choose from the high quality options shown: Moto-Master, EK, Vortex, and more!
• Add a Supermoto Swingarm from Tecstra that is shorter than stock for quicker transitioning between turns. They're also wider than stock to give more clearance for tire warmers and easier wheel removal.
• Add Handguards to wrap-around handguards to protect your levers. Choose from Acerbis and Cycra options.
• Add an Hour Meter to keep track of engine hours and maintenance intervals.
• Add Tire Warmers to keep your tires warm at the track between riding sessions. Vortex Digital Adjustable warmers make it easy to dial in tire temperatures.

PLEASE NOTE:

These conversion kits are special order: The wheels are built to order and some brake components may be special order as well. Some orders may take extra time to complete. Please call if you are in a rush and want to check in-stock availability or expedited options.

HUSQVARNA

FS 450, 2023-and up

KTM

450 SMR, 2023-and up