Spider Adjustable Supermoto Triple Clamps

These triple clamps improve handling for supermoto by turning in better, thanks to the shorter offset. The ability to adjust and fine-tune the handling is made possible thanks to the adjustable steering stem inserts, and allows you to adjust the bike setup to suit your riding style and track layout.

Fits select 2016+ KTM & Husqvarna 125-500cc, as well as 2021+ GasGas 125-450cc!

• Switch between 13mm or 15mm offset by changing the steering stem inserts on the top and bottom clamps.
• Additional offset inserts available in 11/17 or a fixed 14mm.
• 200mm wide, offering more caliper/spoke clearance for offroad models! (This is narrower than the 207mm FS/SMR width, so those models will need to change the M50 caliper to an aftermarket billet caliper to give more clearance for the spokes.)
• Requires different axle and spacers. (Details below) 
  • If using your original forks and fork bottoms, you'll need a different axle, wheel spacer, and rotor spacer. These are available with the triples, or separately as well.
  • If swapping to aftermarket fork bottoms, use the axle and spacers included with the fork bottom kit.
    
• Made from Ergal 7075 aluminum offering a superior balance of strength and weight savings.
• Added ribs machined into the clamps offer increased rigidity.
• Anodized in multiple colors for an attractive and durable finish.

Kit Options Include:

• Complete Kit:  Triples + Axle & Wheel Spacer + Rotor Spacer:
  • Upper & lower triple clamps
  • Steering stem with inserts
  • 1-1/8" (28.6mm) bar clamps
  • Longer Axle
  • Left Wheel Spacer
  • 5mm Rotor Spacer
• Triple Clamps Only:
  • Upper & lower triple clamps
  • Steering stem with inserts
  • 1-1/8" (28.6mm) bar clamps
• Longer Axle & Wheel Spacer + Rotor Spacer:
  • Longer Axle
  • Left Wheel Spacer
  • 5mm Rotor Spacer
• Longer Axle & Wheel Spacer:
  • Longer Axle
  • Left Wheel Spacer