SLIDEmoto Bar End Sliders

SLIDEmoto Bar End Sliders fit most applications and offer protection for the end of your handlebar, as well as the mounting bolts of handguards when those are used.

They feature a counter-sunk (tapered) hole that can be used with the M8 flat head socket cap screws that are commonly used in most hand guard kits. Available with or without longer M8x60 flat head socket cap screws.

Options:

• No Bolts: (#1850)
  2ea Bar End Sliders
  
• Include Longer Bolts: (#1850-HDWR)
  2ea Bar End Sliders
  2ea M8x60 Flat Head Socket Cap Screws
  

SLIDEmoto Bar End Sliders WITHOUT Handguards:

• Warp9 Tapped Handlebars for Offroad or E-Moto: (Use #1850) 
  Simply insert the W9 torx bolt through the Bar End Slider, then the black aluminum spacers, then thread into the W9 Tapped Bars.
  
• Regular handlebars: (Use #1850-HDWR or #1850)
  You can tap the bars yourself using G2-Ergo Threaded Bar End Mounts, or use expanding hardware like Cycra Powergrip Bar End Set.
  
  Looking for longer Bar End Sliders to use without handguards? Try the SLIDEmoto Bar End Sliders For E-Motos!

SLIDEmoto Bar End Sliders + Handguards:

• Most Aftermarket Handguards w/ Aluminum Wrap-Arounds: (Use #1850) 
  Install the Bar End Slider between the bolt and the aluminum bar, then thread on the expansion hardware. This is easiest to do before inserting the hardware assembly into the bars.
  
• Composite Wrap-Around Handguards on regular handlebars: (Use #1850-HDWR)
  Commonly found on FS 450, 450 SMR, and 690 SMC-R. Loosen the handguard bolt and slip the hardware out of the bars so it's not lost inside the bars, then fully disassemble. You won't need the original bolt or the outer silver cup spacer. Insert the new longer flat head screws through the Bar End Slider, followed by the handguard, and then into the expansion hardware. Then reinstall into the bars. 
  
  
• Composite Wrap-Around Handguards on Warp9 Tapped Handlebars: (Use #1850)
  Remove all OEM handguard hardware. Take the silver collared spacer out and re-install into the handguard from the inside. Then insert the W9 torx bolt through the Bar End Slider, the black W9 aluminum spacer, and handguard/silver spacer, before threading into the W9 Tapped Bars.